Published since 1959, Nuclear News is recognized worldwide as the flagship trade publication for the nuclear community. News reports cover plant operations, maintenance and security; policy and legislation; international developments; waste management and fuel; and business and contract award news.
Federal regulators began an investigation this week at the Donald C. Cook nuclear plant around the circumstances of multiple diesel generator failures. The facility continues to operate safely.
Today’s nuclear power plants are the nation’s largest source of carbon-free energy, but they come with high operating and maintenance costs.
Competition from other sources, especially natural gas, coupled with low electricity prices, has resulted in the closure of some plants in the last decade due to economic reasons.
One way to alleviate these economic pressures is to reduce the cost of operating nuclear power plants, including the costs associated with physical security.
Up-front requirements can enhance the ability to support maintenance and operations from start-up through long-term operation
It may seem counterintuitive, but the best time to enhance the ability to support operations and maintenance for a new plant is before construction starts. This is one of many lessons learned by the currently operating nuclear fleet. As construction and startup of many nuclear facilities was completed, it quickly became evident that the ability to efficiently support operations and maintenance was limited. Most of the information necessary to establish and manage procurement of spare and replacement items, maintenance, and configuration of the facilities was unavailable and had to be gathered on a case-by-case, “on-demand” basis. Absence of necessary information and the associated challenges resulted in the need for staff augmentation and multiyear-long projects to develop equipment bills of material and maintenance programs and to perform technical evaluations for the huge quantities of spare and replacement items being requested.
Craig Harrington and Scott Palmtag are the newest members of the Advisory Committee on Reactor Safeguards.
They were appointed yesterday by the Nuclear Regulatory Commission to the independent advisory body tasked with reviewing safety studies and facility license applications. In addition, Walter Kirchner and Matthew Sunseri were reappointed.
The State of Ohio and FirstEnergy reached a settlement this week to avoid prosecution in an ongoing corruption investigation involving the Davis-Besse and Perry nuclear plants.
In 2021, the U.S. Attorney’s Office for the Southern District of Ohio charged the energy company with conspiring “with public officials and other individuals and entities to pay millions of dollars to public officials in exchange for specific official action for FirstEnergy Corp.’s benefit.”
FirstEnergy will pay $19.5 million to the attorney general’s office within five business days and will pay $500,000 for an independent consultant to review and confirm unspecified “changes and remediation efforts” within the company. The company will also cooperate with investigators for two years or until the investigation, litigation, or prosecution is complete.
A facility at Argonne National Laboratory has been simulating nuclear reactor cooling systems under a wide range of conditions since the 1980s. Its latest task, described by Argonne in an August 13 news release, is testing the performance of passive safety systems for new reactor designs.
Designed as a half-scale model of a real reactor system, Argonne’s Natural Convection Shutdown Heat Removal Test Facility (NSTF) is used for large-scale experimental testing of the performance of passive safety systems, which are designed to remove decay heat using natural forces including gravity and heat convection. Those tests yield benchmarking data qualified to the level of National Quality Assurance-1 (NQA-1) that is shared with vendors and regulators to validate computational models and guide licensing of new reactors and components.
The first high-temperature, gas-cooled reactor ever built in the United States was Unit 1 at the Peach Bottom Atomic Power Station. This demonstration plant, located on the Susquehanna River approximately 80 miles southwest of Philadelphia, Pa., was tasked with validating HTGR design codes. It produced over 1.2 million megawatt-hours of electricity over 1,349 equivalent full-power days (EFPDs), which was distributed by the Philadelphia Electric Company.
QSA Global, a provider of radioisotope products, and Niowave, a Michigan-based producer of medical radioisotopes, announced that the companies will codevelop a scalable radium purification process using Niowave’s radium-226 processing technology to meet the demand for actinium-225, an alpha-emitter used in the treatment of cancer. According to the companies, the strategic partnership marks a significant advancement in the field of radiopharmaceutical technology, enhancing the supply chain for critical radioisotopes, including Ac-225.
Niowave uses a closed-loop cycle to produce high-purity Ac-225 and other alpha emitters from Ra-226 using a superconducting electron linear accelerator. According to the company’s website, the electron beam impinges on a photon converter to irradiate the Ra-226, inducing a photon-neutron reaction to Ra-225, which decays to Ac-225.
As Bruce Power continues predevelopment work, public input is being sought on the potential Bruce C nuclear power expansion project in Ontario.
Bruce Power recently submitted its initial project description to the Impact Assessment Agency of Canada for an expansion that would add up to 4,800 MWe. Earlier this year, the Canadian government announced up to C$50 million ($36.8 million) in funding for the Bruce C project, which would be Canada’s first major expansion of a large nuclear plant in decades.
The IAEA’s Milestones in the Development of a National Infrastructure for Nuclear Power was last revised back in 2015. Now, about nine years later and amid a resurgence of interest in nuclear power, the latest guidance on the IAEA’s Milestones Approach offers updated advice to policymakers in nations looking to introduce a nuclear power program or expand an existing fleet, encouraging them to evaluate infrastructure readiness before seeking bids from reactor vendors. For the first time, the guide includes an “annex” specific to small modular reactor deployments.
Ohio Gov. Mike DeWine recently made new appointments—including American Nuclear Society members Raymond Cao of Ohio State University and Alicia Walls of BWX Technologies—to the Ohio Nuclear Development Authority.
The nine-member governor-appointed board was created in June 2023 by state lawmakers aimed at boosting research and development of advanced nuclear reactors, commercial isotope production, and nuclear waste reduction and storage technology. The group has initial funding of $750,000.
Fifty-five high schoolers representing 14 Asian countries participated in an inaugural nuclear science competition earlier this month in the Philippines.
The event was held in the run-up to the United Nations’ International Youth Day, which is celebrated worldwide on August 12 to recognize and encourage the potential of young people as active partners in the global society. The nuclear field presents many opportunities for the next generation of scientists and engineers.
The National Ignition Facility (NIF) at Lawrence Livermore National Laboratory has achieved fusion ignition at least five times, each time by directing its 192 high-powered lasers on a capsule containing a tiny, 2-millimeter target filled with hydrogen fuel. Not every shot achieves ignition, however. Tiny imperfections in the targets can mean fizzle, not fusion. But each of the targets used in successful experiments to date have something in common: they were characterized and selected by the 4Pi Integrated Metrology System, a new measurement system developed by General Atomics. Now, the team behind that system is being recognized.
GA announced last week that its Metrology Research and Development team had won the 2024 "Team of the Year" R&D 100 Professional Award from R&D World. The magazine that each year announces the R&D 100 awards that have been dubbed the “Oscars of Innovation” also selects just one “Team of the Year” and announces that award together with four other professional awards.
Bradley Williams
The United States is already off to a good start with respect to new nuclear deployment. The completion of Vogtle Units 3 and 4, the Natrium groundbreaking, and X-energy’s partnership with Dow Chemical to deploy an advanced reactor for industrial applications are all important first steps. These efforts are being complemented by the flurry of licensing activity with the Nuclear Regulatory Commission and overwhelming support in Congress and the White House. But to achieve the current administration’s goal of tripling nuclear capacity by 2050, more needs to be done.
Thick, black smoke pouring from one of the cooling towers at Ukraine’s Zaporizhzhia nuclear power plant over the weekend raised alarm about safety at the facility as the military conflict with Russia continues.
On-site staff from the International Atomic Energy Agency witnessed the smoke and reported hearing multiple explosions at Zaporizhzhia, which is the largest nuclear plant in Europe and one of the largest worldwide.
Engineering company Rolls-Royce is considering the sale of its small modular reactor subsidiary to inject new funding into the company’s overall business plans, the Sunday Telegraph first reported Aug. 3.
The company is looking to raise hundreds of millions, with a current valuation of £1.6 billion ($2 billion), as it sets its sights on being the first to deploy SMRs in the United Kingdom. Rolls-Royce recently cleared step two of the U.K.’s generic design assessment (GDA)—a competition launched in 2023 to bring SMRs on line in the 2030s.
The Nuclear Regulatory Commission is providing guidance to nuclear power plant licensees looking to use decommissioning trust fund (DTF) money to dispose of major reactor components like steam generators and reactor vessel heads while the plant is still operational.
On August 5, the NRC issued the interim staff guidance Use of the Decommissioning Trust Fund During Operations for Major Radioactive Component Disposal (REFS-ISG-2024-01), which provides the NRC staff’s regulatory position regarding the use a reactor’s DTF for the disposal of major radioactive components while the plant is still operational. Under NRC regulations, the DTF may be accessed solely for decommissioning expenses as defined in 10 CFR 50.2, unless an exemption is granted by the NRC.
The next nuclear renaissance may be upon us, but with it comes a perfect storm. The industry is unprepared for a surge in demand for goods and services from both the existing light water fleet and the next generation of reactors. We are currently teetering on the edge of severe supply chain issues, but if the nuclear industry can understand the sources of our challenges, we can mitigate them.
Westinghouse Electric Company announced Aug. 8 that it has completed the first pressing of ADOPT nuclear fuel pellets at the company’s Springfields Fuel Manufacturing Facility in the United Kingdom. The pellets, which can contain up to 8 percent uranium-235 by weight, are destined for irradiation testing in Southern Nuclear’s Vogtle-2 pressurized water reactor.
The Department of Energy yesterday announced 17 awards totaling $4.6 million for projects at private fusion companies in cooperation with U.S. national laboratories and universities through the Innovation Network for Fusion Energy (INFUSE) program. Each one- to two-year award ranges from $100,000 to $500,000.