The Nuclear Waste Technical Review Board, which evaluates the Department of Energy’s activities on radioactive waste management, is holding a hybrid (in person and virtual) public meeting on August 30 to discuss the DOE’s consent-based process for siting one or more federal interim storage facilities for commercial spent nuclear fuel. The DOE’s research and development related to high-burnup SNF and advanced reactor waste disposal will also be discussed.

The Nuclear Regulatory Commission has accepted for formal review NuScale Power’s standard design approval (SDA) application for its updated small modular reactor design, the Portland, Ore.–based firm announced yesterday.

The Idaho National Laboratory is moving closer toward closing its largest building—which, at more than 316,000 square feet, could comfortably house a modern U.S. aircraft carrier, according to the Department of Energy.

The Department of Energy today released its final environmental assessment (EA) and a proposed finding of no significant impact (FONSI) for the design, construction, and operation of the Molten Chloride Reactor Experiment (MCRE) at Idaho National Laboratory. The draft EA was released earlier this year, in March, for four weeks of public comments.

Dozens of students from the Savannah River Nuclear Solutions (SRNS) Internship Program were recently offered a chance at full-service positions during what SRNS called a signing day event held at the Department of Energy’s Savannah River Site, near Aiken, S.C.

CFPP LLC, the limited liability company established by Utah Associated Municipal Power Systems (UAMPS) in 2020 to bring its Carbon Free Power Project to fruition, has applied to the Nuclear Regulatory Commission for a limited work authorization (LWA) to permit certain early project construction activities prior to the issuance of a combined license (COL). In a July 31 news release, CFPP said that should its application be approved, early-scope construction on the small modular reactor project would likely begin in mid-2025.

The Department of Energy’s Office of Environmental Management awarded a contract to Aptim Federal Services of Baton Rouge, La., to perform deactivation, decommissioning, and removal of the former Ion Beam Facility at Los Alamos National Laboratory in New Mexico.

Helling

Terry

The relatively young pedagogical field of mind, brain, and education (MBE) is being increasingly applied to training programs in the nuclear industry. Last month, this column highlighted how the MBE approach is being used at the Beaver Valley nuclear power plant in Shippingport, Pa. (“Neuroscience meets nuclear science at Beaver Valley,” NN, June 2023, p. 80). This month, the focus is on the MBE efforts of Pittsburgh-­based Westinghouse Electric Company, led by Westinghouse employees Pamela Terry, business and staff development lead, and Dave Helling, senior training advisor.

Helling was one of four panelists (along with Beaver Valley’s instructional technologist Annaliese Piraino) who participated in a discussion at the Conference on Nuclear Training and Education: A Biennial International Forum (CONTE 2023) earlier this year. There, he summarized his two conference presentations and discussed aspects of his company’s psychology-­ and neuroscience-­based approach to training and education.

To the ears of the nuclear community, the news from Georgia Power this morning may sound a bit like “Ode to Joy” from Beethoven’s Ninth: After years of delay, Unit 3 at the Vogtle nuclear power plant has entered commercial operation, becoming the first newly constructed power reactor in the United States in more than 30 years and the nation’s first Westinghouse-supplied Generation III+ AP1000 unit to be placed into service. The new unit joins Vogtle-1 and -2—1,169-MWe four-loop pressurized water reactors that entered commercial operation in the late 1980s.

The Nuclear Regulatory Commission has authorized Southern Nuclear Operating Company to begin loading fuel into Unit 4 at the Vogtle nuclear expansion site near Waynesboro, Ga., making the unit the second reactor to reach this milestone in the agency’s combined license process—a little less than one year after Vogtle-3. (Prior to 1989, reactors were licensed under a two-step process, requiring both a construction permit and an operating license.)

The Nuclear Regulatory Commission reported on July 27 that it has issued a license to Rare Element Resources Inc. for a proposed pilot project in Wyoming to demonstrate a proprietary process to extract rare earth elements from ore.

Sometimes, even with decades of research and testing, a project never gets off the ground. That has been the case for U.S. nuclear thermal rockets—so far. Research began in the 1950s and peaked with a series of rigorous ground tests for NERVA—the Nuclear Engine for Rocket Vehicle Applications—before the program was canceled in 1973. Five decades on, this technology has yet to make it to the launchpad. But while mission priorities shift, the physics is solid: Fission-powered nuclear thermal rockets (NTRs) still offer two to five times greater efficiency than conventional rockets.

In an 86–11 vote yesterday, the Senate passed the fiscal year 2024 National Defense Authorization Act (NDAA), and with it, the Accelerating Deployment of Versatile, Advanced Nuclear for Clean Energy (ADVANCE) Act.

Introduced March 30 by the senatorial trio of Shelley Moore Capito (R., W.Va.), Tom Carper (D., Del.), and Sheldon Whitehouse (D., R.I.), The ADVANCE Act was endorsed by the Environment and Public Works Committee in May in a bipartisan 16–3 vote and was made part of the annual must-pass NDAA earlier this month.

On July 14, the House narrowly passed (219–210) its own version of the NDAA, containing several controversial amendments pushed by GOP conservatives. The two chambers are now faced with reconciling the two measures and producing a compromise version that can be sent to President Biden’s desk.

Through its now one-year-old Nuclear Fuel Fund, the U.K. government has awarded Westinghouse three grants to upgrade and expand the Springfields Fuel Fabrication Facility to support Britain’s next-generation nuclear reactors, the American-based company announced yesterday.

The Department of Energy is providing $4.6 million in funding for 18 projects at national laboratories and U.S. universities to help address critical scientific and technological challenges in pursuing fusion energy systems.

Framatome’s Protect EATF assembly. (Photo: Framatome)

The nuclear industry’s first 100 percent accident tolerant fuel assembly has successfully completed its initial cycle of operation at a U.S. nuclear power plant, Framatome announced earlier this week.

Following 24 months of operation at Constellation Energy’s two-unit Calvert Cliffs nuclear power plant in Lusby, Md., testing and inspections confirm that Framatome’s lead Enhanced Accident Tolerant Fuel (EATF) assembly safely withstood in-reactor conditions and performed as designed, according to the French-based company.

"The accelerated delivery and proven performance of our technology reflects the dedication and expertise of our people with the collaborative support from the industry,” said Lionel Gaiffe, senior executive vice president of Framatome’s fuel business unit. “Collectively, we are one step closer in the qualification of our Protect EATF technology for the nuclear industry. With the adoption and implementation of our enhanced technologies, our industry partners continue to demonstrate their commitment to enhance the safety and performance of their reliable, low-carbon, energy operations.”

I am lucky. I live near a nuclear power plant—arguably the best run and most beautiful power plant in the world. It’s comforting.

It’s comforting to see Columbia Generating Station’s clean white plume of pure steam rise into the air every time I leave my house. Every time I’m driving home. Every time it’s freezing outside. Every time it’s scorching hot.

Even the few times when it has gone quiet for refueling, the plant stands like a Norman castle protecting the region from energy poverty. It’s comforting.

The Massachusetts Institute of Technology and the Clean Air Task Force are offering a three-day course “Nuclear Energy in a Low-Carbon Future: Key Facts and Issues” on August 1–3. The course is organized by MIT’s Jacopo Buongiorno, Tokyo Electric Power Company Professor in Nuclear Engineering and director of science and technology for the university’s Nuclear Reactor Laboratory.

The daily schedule runs from 9:00 a.m.–5:00 p.m. (Eastern) on the first two days and 9:00 a.m.–12:30 p.m. on the third day.

The in-person version of the course is fully booked, but slots for remote attendance are still available—at no cost. Registration is required by completing a registration form.

NASA has selected 11 companies, including Zeno Power, to develop technologies that could support long-term exploration on the moon and in space. The technologies range from lunar surface power systems to tools for in-space 3D printing, which will expand industry capabilities for a sustained human presence on the moon through the Artemis program, as well as other NASA, government, and commercial missions.

BWX Technologies announced today that it has been selected to supply the nuclear reactor and fuel for the Defense Advanced Research Projects Agency’s Demonstration Rocket for Agile Cislunar Operations (DRACO) program—the goal of which is to demonstrate a nuclear thermal propulsion (NTP) engine in orbit.