Westinghouse's eVinci microreactor (Image: Westinghouse)

Westinghouse Electric Company has signed a service agreement with the Canadian Nuclear Safety Commission (CNSC) to bring the eVinci microreactor closer to commercialization, the company announced Tuesday. The agreement initiates a vendor design review (VDR)—a prelicensing technical assessment of a company’s reactor technology.

The objective of a VDR, according to the CNSC, is to verify the acceptability of a nuclear power plant design with respect to Canadian nuclear regulatory requirements and expectations, as well as Canadian codes and standards. The review also aims to identify fundamental barriers to licensing a new design in Canada and to assure that a resolution path exists for any design issues identified.

Evidence that Canada is serious about becoming a world leader in small modular reactor deployment continues to mount. Ontario-based SMR developer Terrestrial Energy yesterday inked a memorandum of understanding with Invest Alberta—a crown corporation of the government of Alberta that promotes the province internationally—to support commercialization of the company’s Integral Molten Salt Reactor (IMSR) in western Canada.

The Canadian Nuclear Safety Commission has renewed the operating license of the reactor at the Point Lepreau nuclear plant for a period of 10 years. As a result, the facility’s 660-MWe CANDU-6 unit, the five-year license for which was set to expire on June 30, is now permitted to operate until the end of June 2032. License holder NB Power had requested an unprecedented 25-year extension.

The Nuclear Regulatory Commission and Canadian Nuclear Safety Commission have completed a first joint technical review of Terrestrial Energy’s Integral Molten Salt Reactor, the company announced earlier this week.

The IMSR was selected in December 2019 to be the first advanced non–light water nuclear reactor technology to be studied under an August 2019 NRC/CNSC memorandum of cooperation aimed at enhancing regulatory effectiveness through collaborative work on technical reviews of advanced reactor and small modular reactor technologies.

Bruce Power and Ontario Power Generation (OPG) have announced an agreement to work together to support new nuclear technologies in Ontario. Bruce Power operates the Bruce nuclear plant and OPG operates the Darlington and Pickering facilities.

Canadian Nuclear Laboratories (CNL) is asking its stakeholders (members of the public, industry, elected officials, and employees) to support a proposal to construct the Near Surface Disposal Facility (NSDF) to dispose of legacy radioactive waste at the Chalk River Laboratories in Ontario.

Ontario Power Generation (OPG) has selected GE Hitachi Nuclear Energy (GEH) as its technology partner for the Darlington nuclear new-build project. The companies will work to deploy GEH’s BWRX-300 small modular reactor at OPG’s Darlington nuclear plant, located in Clarington, Ontario.

The Canadian Nuclear Safety Commission has approved the renewal of the site preparation license for Ontario Power Generation’s Darlington new-build nuclear project. First granted in 2012, the license is now valid until October 11, 2031.

The Canadian Nuclear Safety Commission and the U.S. Nuclear Regulatory Commission have completed the first collaborative project under a two-year-old memorandum of cooperation (MOC) aimed at enhancing technical reviews of advanced reactor and small modular reactor technologies, the CNSC announced earlier this week.

The project, a 23-page joint report from the regulators on a white paper submitted last July by X-energy regarding reactor pressure vessel (RPV) construction code specifications for the company’s Xe-100 SMR, was released to the public on August 6. The Xe-100 is an 80-MWe unit that can be scaled into a “four-pack” 320-MWe power plant, according to X-energy.

The Canadian Nuclear Safety Commission (CNSC) has completed phase one of its pre-licensing vendor design review (VDR) for Moltex Energy’s 300-MW Stable Salt Reactor–Wasteburner (SSR-W)—a molten salt reactor that uses nuclear waste as fuel. CNSC entered into an agreement with Moltex in November 2017 to conduct the initial phase of the review.

Global First Power’s (GFP) Micro Modular Reactor (MMR) project has moved to the formal license review phase with the Canadian Nuclear Safety Commission (CNSC), becoming the first small modular reactor to do so.

New Brunswick Premier Blaine Higgs announces C$20 million in funding for the ARC-100 small modular reactor. Photo: ARC Canada

The Canadian province of New Brunswick has awarded C$20 million (about $15.7 million) to ARC Clean Energy Canada (ARC Canada) to support the development of the proposed ARC-100 advanced small modular reactor. The premier of New Brunswick, Blaine Higgs, announced the award during his state of the province address on February 10.

ARC Canada, headquartered in Saint John, New Brunswick, is a subsidiary of U.S.-based ARC Clean Energy, formerly known as Advanced Reactor Concepts. The company’s ARC-100 is a 100-MWe integrated sodium-cooled fast reactor that uses a metallic uranium alloy fuel. Based on Argonne National Laboratory’s Experimental Breeder Reactor-II, the reactor is designed to operate for 20-plus years without refueling.

In October 2019, ARC Canada announced that it had completed the first phase of the Canadian Nuclear Safety Commission’s (CNSC) vendor design review. (While the phase-one assessment provides detailed feedback regarding a vendor’s understanding of the CNSC’s requirements for a nuclear power plant in Canada, it does not certify the design or license the reactor.)

A cutaway view of the BWRX-300. Image: GE Hitachi Nuclear

The Nuclear Regulatory Commission has issued a final safety evaluation report for the first of several licensing topical reports (LTR) submitted by GE Hitachi Nuclear Energy (GEH) for the BWRX-300 small modular reactor, the company announced on December 1.

The initial LTR, titled “BWRX-300 Reactor Pressure Vessel Isolation and Overpressure Protection,” was submitted to the NRC in December 2019, officially beginning the U.S. licensing process. This LTR forms the basis for the “dramatic simplification” of the BWRX-300, according to GEH.

In its announcement, GEH noted that two additional LTRs were submitted in early 2020 and that it anticipates reviews of those reports to be completed in the coming months. A fourth LTR was submitted in September 2020, the company added.