China’s second demonstration reactor—Fangchenggang Unit 4—connected to the grid on April 9, China General Nuclear Power Group has announced. Located in the autonomous region of Guangxi, the reactor achieved first criticality April 3.

Construction formally began this week on two new nuclear reactors in China.

The China National Nuclear Corporation held a ground-breaking ceremony to mark the first phase of construction of the Jinqimen nuclear power plant in the eastern province of Zhejiang.

China’s State Council recently approved the construction of four Westinghouse AP1000 reactors—two at China’s Sanmen plant in Zhejiang Province and two at the Haiyang plant in Shandong Province.

The plants currently house two AP1000 units each. Sanmen’s reactors are rated at 1,157 MWe and Haiyang’s at 1,170 MWe. Sanmen-1 and -2 began commercial operation in 2018. Haiyang-1 started commercial operation in 2018, and Haiyang-2 in 2019.

The Fuqing nuclear plant’s Unit 6, one of two Chinese-designed and -developed Hualong One reactors at the site, has entered commercial operation, China National Nuclear Corporation (CNNC) announced on March 25. The milestone was reached some 14 months after the reactor’s twin, Fuqing-5, became the first Hualong One in the world to enter commercial operation.

Also known as the HPR1000, the Hualong One is a 1,000-MWe Generation III pressurized water reactor that incorporates design elements of CNNC’s ACP1000 and China General Nuclear Power Group’s ACPR1000+.

Unit 3 at Pakistan’s Karachi nuclear power plant has been connected to the national grid, China National Nuclear Corporation (CNNC) announced on March 4, making it the second Hualong One reactor outside of China to have reached the last major step prior to commercial operation. (The distinction of being the first belongs to Unit 3’s twin, Karachi-2, which was connected to the grid in March 2021 and entered commercial operation in May.)

Karachi-3 had achieved criticality on February 21 after completing hot functional testing and entering the fuel loading stage last November.

The Office for Nuclear Regulation (ONR) and the Environment Agency (EA) have found the UK HPR1000 reactor suitable for construction in the United Kingdom, the regulators jointly announced last week.

Hot functional testing at Unit 3 of Pakistan’s Karachi nuclear power plant has been completed ahead of schedule, and the reactor has entered the fuel loading stage, China National Nuclear Corporation announced on November 11.

Unit 2 at Pakistan’s Karachi nuclear power plant officially began commercial operation in late May, gaining the distinction of being the first Hualong One reactor outside of China to do so, China National Nuclear Corporation announced last week. Construction of Karachi-2 began in August 2015, and connection to the grid was accomplished in March of this year.

Unit 5 at the Fuqing nuclear plant in China’s Fujian Province has entered commercial operation, becoming the world’s first Hualong One reactor to do so, China National Nuclear Corporation (CNNC) announced on January 30.

The unit was connected to the power grid in late November of last year, after having achieved initial criticality the previous month.

Also known as the HPR1000, the Hualong One is a Chinese-designed and -developed 1,000-MWe Generation III pressurized water reactor, incorporating design elements of CNNC’s ACP1000 and China General Nuclear’s ACPR1000+ reactors.

There’s more: Fuqing-5’s twin HPR1000, Fuqing-6, is scheduled for commercial startup later this year. In addition, CNNC is building two Hualong One reactors at the Zhangzhou site in Fujian Province (construction of Unit 1 began in October 2019, while Unit 2’s construction commenced last September) and one at Taipingling in Guangdong Province, with another planned for the site.

Also, China General Nuclear is building two Hualong One reactors (Units 3 and 4) at its Fangchenggang plant in Guangxi Province (2022 planned startup), while two CNNC units are under construction at Pakistan’s Karachi plant (commercial start dates of 2021 and 2022).

China’s Fuqing nuclear plant. Photo: CNNC

Unit 5 at China National Nuclear Corporation’s (CNNC) Fuqing nuclear plant in southeastern China’s Fujian Province has become the world’s first Hualong One reactor to be connected to the power grid, the company announced on November 27. “It was confirmed on-site that all technical indicators of the unit met the design requirements and that the unit was in good condition,” CNNC said.

Fuel loading at Fuqing-5 began on September 4, following the issuance of the reactor’s operating license by China’s Ministry of Ecology and Environment. The loading of 177 sets of fuel assemblies was completed on September 10, and initial criticality was achieved on October 21. The unit is scheduled to enter commercial operation before the end of the year.

Also known as the HPR1000, the Hualong One is a Chinese-designed and -developed 1,000-MWe Generation III pressurized water reactor, incorporating design elements of CNNC’s ACP1000 and China General Nuclear’s ACPR1000+ reactors. Fuqing-5’s twin HPR1000, Fuqing-6, is scheduled to start contributing power to the grid next year.

Unit 5 at China National Nuclear Corporation’s (CNNC) Fuqing nuclear power plant has achieved initial criticality, becoming the very first Hualong One reactor to reach that milestone, the company announced on October 22. If all goes according to schedule, the unit will enter commercial operation later this year.

Fuel loading for Unit 5 began on September 4, following the issuance of the reactor’s operating license by China’s Ministry of Ecology and Environment. The loading of 177 sets of fuel assemblies was completed on September 10.

Also known as the HPR1000, the Hualong One is a Chinese-designed, 1,000-MWe Generation III pressurized water reactor. Fuqing-5’s twin HPR1000, Fuqing-6, is scheduled to start contributing power to the grid next year.

Located in China’s Fujian Province, Fuqing also houses four 1,000-MWe CPR-1000 PWRs, with commercial start dates of November 2014, October 2015, October 2016, and September 2017.

Fuel loading begins at Fuqing-5. Photo: CNNC

The loading of 177 fuel assemblies into the reactor core of Unit 5 at the Fuqing nuclear power plant began on September 4, following the issuance of the unit’s operating license from China’s Ministry of Ecology and Environment, the China National Nuclear Corporation (CNNC) announced on September 8. Construction of the reactor began in May 2015.

Unit 5 will be the first of the Hualong One reactors to enter commercial operation, expected later this year if all goes according to plan. Also known as the HPR1000, the Hualong One is a 1,000-MWe Generation III pressurized water reactor, indigenous to China. Unit 5’s twin HPR1000 at Fuqing, Unit 6, is scheduled to start contributing power to the grid next year.

Located in China’s Fujian Province, Fuqing also houses four 1,000-MWe CPR-1000 PWRs, with commercial start dates of November 2014, October 2015, October 2016, and September 2017, respectively.