Newswire

Tag: rpv

NuScale places first long-lead material production order with Doosan

March 14, 2023, 3:00PMNuclear News
A rendering of a NuScale VOYGR plant. (Image: NuScale)

NuScale Power, the Portland, Ore.–based small modular reactor developer, announced last week that it has placed the first upper reactor pressure vessel (RPV) long-lead material (LLM) production order with South Korea’s Doosan Enerbility.

Rooppur-2 reactor pressure vessel installed

October 25, 2022, 9:30AMNuclear News
At Bangladesh’s Rooppur plant, a Liebherr-11350 heavy caterpillar crane raises the reactor vessel to Unit 2’s transportation portal. (Photo: Rosatom)

In case anyone forgot, Russia can build nuclear power plants, not just occupy them—as discussed a week ago on Newswire. Last week in Bangladesh, workers completed the installation of the reactor pressure vessel (RPV) for the second unit at the Rooppur construction site.

CNSC, NRC complete joint report on the Xe-100 SMR

August 19, 2021, 12:00PMNuclear News

The Canadian Nuclear Safety Commission and the U.S. Nuclear Regulatory Commission have completed the first collaborative project under a two-year-old memorandum of cooperation (MOC) aimed at enhancing technical reviews of advanced reactor and small modular reactor technologies, the CNSC announced earlier this week.

The project, a 23-page joint report from the regulators on a white paper submitted last July by X-energy regarding reactor pressure vessel (RPV) construction code specifications for the company’s Xe-100 SMR, was released to the public on August 6. The Xe-100 is an 80-MWe unit that can be scaled into a “four-pack” 320-MWe power plant, according to X-energy.

Overview of Holtec's SMR-160

April 5, 2021, 9:30AMANS Nuclear CafeJodine Jansen Vehec
Fig. 1: The layout of a typical SMR-160 site.

Holtec International’s SMR-160 is a pressurized light-water thermal spectrum reactor that relies on natural circulation, thereby eliminating the need for reactor coolant pumps during normal operation. The reference design incorporates a lower pressure conventional steam turbine and wet cooling via a tube-and-shell condenser coupled with forced-draft cooling towers. Optionally, the plant can use dry cooling via Holtec’s HI-KOOL air-cooled condenser.

First RPV for Turkish nuclear plant arrives

November 18, 2020, 6:59AMNuclear News

The Unit 1 reactor pressure vessel arrives at the Akkuyu site. Photo: Akkuyu Nuclear JSC

Russian company Atommash has delivered the reactor pressure vessel for Unit 1 of the Akkuyu plant, the nuclear power facility under construction in Turkey, Akkuyu Nuclear JSC announced recently.

Atommash is a branch of AEM Technologies, which is part of Atomenergomash, the equipment-building division of Rosatom, Russia’s state atomic energy corporation. Akkuyu Nuclear, based in Ankara, was established to implement the Russian-Turkish project.

It took some three years to manufacture the 330-metric ton, 12-meter-long reactor pressure vessel and 20 days to transport it from the Atommash plant in Volgodonsk, Russia, to the eastern cargo terminal at the Akkuyu plant site, according to Akkuyu Nuclear.

Reactor pressure vessel for Akkuyu-1 shipped, steam generators delivered

October 5, 2020, 9:43AMNuclear News

The reactor pressure vessel for Akkuyu-1. Photo: Rosatom

Rosatom, Russia’s state atomic energy corporation, announced last week that the reactor pressure vessel for Unit 1 of Turkey’s Akkuyu plant has been shipped from the Atommash plant in Volgodonsk, Russia. Also, the four steam generators for the reactor have arrived at the Vostochny Cargo Terminal, near the port of Mersin in southern Turkey. Atommash has shipped all the most important large-sized equipment for the primary circuit of the reactor for Akkuyu-1, Rosatom said.

Atommash is a branch of AEM Technologies, which is part of Atomenergomash, the equipment-building division of Rosatom.